All training and courses
>
The Fundamentals of Building Roads

The Fundamentals of Building Roads

Foundation
Introduction
In Person
1 Day
8
CPD Hours
See course dates
This course is in partnership with
Learning methods
Case studies
AR/VR Component
Expert Led
Learn at your own pace
Assessments
Online Quiz
Practical Learning - No Assessment
Practical Assessment
Outcome
Certificate of Foundational Knowledge
Certificate of Completion
Certificate of Attendance
8
CPD Hours
Meet our course experts.
Dr Michael Moffatt
National Technical Leader - Pavements
Joe Grobler
Principal Engineer
Brendan Williams
Senior Engineer
Johan Cronje
Principal Engineer
Dr James Grenfell
Principal Engineer
Interested in registering?
See course dates

Course Description

Understand what goes into building a road and why.

Building a durable road requires more than choosing materials and following a design. Each decision, from estimating traffic demand to preparing the subgrade and controlling construction quality, affects how the finished pavement will perform.

The Fundamentals of Building Roads gives you a practical overview of the complete pavement design and construction process.

Designed for engineers, managers, planners, contractors and quality professionals, this one-day workshop explains both the what and the why behind modern pavement practice.

Start with design traffic and the loads a pavement must carry. Examine how subgrade conditions, moisture, compaction and granular materials establish the foundation for pavement performance.

Then explore the principal pavement and surfacing options. Understand where sprayed seals, asphalt, stabilised materials and concrete pavements fit – and how traffic, environment, materials and project requirements influence their selection.

The course introduces empirical and mechanistic-empirical thickness design for flexible pavements, along with the design principles used for rigid concrete pavements. Worked examples help make the design inputs and processes easier to follow.

The final session brings the course together through construction and quality assurance. Learn how specifications, inspection, testing and quality records help confirm that the pavement built on site matches the design intent.

Each technical session is led by an NTRO subject-matter expert, giving you access to specialists across pavement materials, surfacing, design and construction. Question-and-answer sessions allow you to test the content against your own projects and draw directly on their technical and practical experience.

Whether you need a strong introduction or a structured refresher, the course provides the breadth to understand how pavement decisions connect across the full road-building process.

Register now and build a stronger foundation in pavement design and construction.

Course structure

  • Pavement design and construction fundamentals – understand pavement systems, design objectives and the factors that influence performance.
  • Design period and design traffic – calculate traffic loading and understand how axle groups, load damage and growth affect pavement design.
  • Subgrades and unbound granular materials – examine material properties, moisture, density, compaction and their influence on pavement behaviour.
  • Stabilised materials – explore mechanical and chemical stabilisation of subgrades and pavement layers.
  • Sprayed seals – compare seal types, primes and initial seals and select treatments for different conditions.
  • Asphalt pavements – understand asphalt materials, behaviour, manufacture, placement and testing.
  • Empirical pavement design – use established design charts to determine unbound granular pavement thickness beneath thin bituminous surfacings.
  • Mechanistic-empirical flexible pavement design – examine structural responses, material performance and the inputs used to design bound pavements.
  • Concrete pavements – compare rigid pavement types and understand concrete pavement thickness-design principles.
  • Construction and quality assurance – connect design requirements with construction control, inspection, testing and acceptance.

Learning outcomes

By the end of this course, participants will be able to:

  • Explain how traffic loading, subgrade conditions, pavement materials and environmental factors influence pavement design.
  • Compare unbound granular, stabilised, asphalt and concrete pavement systems and identify where each may be applied.
  • Describe how moisture, density and compaction affect subgrades and granular pavement materials.
  • Distinguish between sprayed-seal types, primes and initial seals and recognise the factors that guide surfacing selection.
  • Explain the principal inputs and methods used in empirical, mechanistic-empirical and rigid pavement thickness design.
  • Identify the construction, testing and quality-assurance controls required to deliver the intended pavement performance.

Topics Covered

  • Pavement systems and design principles
  • Design life and design traffic
  • Axle loads and traffic-load damage
  • Subgrade assessment and preparation
  • Unbound granular pavement materials
  • Moisture-density relationships and compaction
  • Mechanical and chemical stabilisation
  • Sprayed seals, primes and initial seals
  • Asphalt materials, behaviour and construction
  • Empirical design of granular pavements
  • Mechanistic-empirical flexible pavement design
  • Concrete pavement types
  • Rigid pavement thickness design
  • Pavement construction practices
  • Inspection, testing and quality assurance

This course is for:

  • Road and transport agency personnel
  • Pavement and road engineers
  • Site engineers
  • Asset managers and planners
  • Project managers and directors
  • Contract managers
  • Quality managers
  • Road and concession-management contractors
  • Developers and engineering consultants
  • Infrastructure investment and planning professionals
  • Professionals new to pavement engineering
  • Experienced practitioners seeking a structured refresher

Course price

Course Price
$
1309
%
$
00
Course pricing designed to support your learning journey.
Book now, pay later
$
Invoice
off
%
$
00
Don't wait another moment. Book now and pay later via invoice
Group bookings of 6+
$
-10%
off
%
$
00
Book a group of 6 or more people and get 10% off the full price.
Course price
$
1309
%
$
00
Course pricing designed to support your learning journey!

Upcoming course dates

Melbourne
10 March 2027
-
10 March 2027
NTRO Melbourne 80a Turner St, Port Melbourne, VIC 3207
Dr James Grenfell
Principal Engineer
NTRO
Wagga Wagga
28 April 2027
-
28 April 2027
TBC
Brendan Williams
Senior Engineer
NTRO
Brisbane
5 May 2027
-
05 May 2027
NTRO Brisbane Level 14, 100 Wickham Street, Fortitude Valley, QLD 4006
Joe Grobler
Principal Engineer
NTRO
Perth
25 August 2027
-
25 August 2027
NTRO Perth Suite 5, 610 Murray St, West Perth, WA, 6005
Dr Michael Moffatt
National Technical Leader - Pavements
NTRO
Dr James Grenfell
Principal Engineer
NTRO
Sydney
13 October 2027
-
13 October 2027
NTRO Sydney 53 Balfour Street, Chippendale, NSW 2008
Brendan Williams
Senior Engineer
NTRO
Bendigo
27 October 2027
-
27 October 2027
TBC
Dr James Grenfell
Principal Engineer
NTRO
Toowoomba
17 November 2027
-
17 November 2027
TBC
Joe Grobler
Principal Engineer
NTRO

Don't see this course in your city?

Don't see a course in your area? Register your interest now and let us know where you would like to study.

Register your interest